Belkin F5D8633-4 Manuel De L'utilisateur page 43

Alternate Setup Method
Setting Custom Domain Name Server (DNS) Settings
A "Domain Name Server" is a server located on the Internet that
translates Universal Resource Locaters (URLs) like "www.belkin.
com" to IP addresses. Many Internet Service Providers (ISPs) do not
require you to enter this information into the Router. The "Automatic
(1)
from ISP" box
specific DNS address. If you are using a static IP connection type,
then you may need to enter a specific DNS address and secondary
DNS address for your connection to work properly. If your connection
type is dynamic or PPPoE, it is likely that you do not have to enter a
DNS address. Leave the "Automatic from ISP" box checked. To enter
the DNS address settings, uncheck the "Automatic from ISP" box and
enter your DNS entries in the spaces provided. Click "Apply Changes"
(2)
to save the settings.
should be checked if your ISP did not give you a
(1)
(2)
41 41
1
2
3
4
5
6
7
8
9
10