afx light 8BEAM-FX Manuel D'utilisation page 7

TILT 2 INVERSE
T o select 2Til, Press the ENTER button to show the TILT 2 INVERSE on the display. Use the DOWN/UP button to
select the Yes (tilt 1 inversion) or No (normal) mode. Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
AUTO TEST
T o select Test, press the ENTER button to show the TEST on the display and the unit will run a self‐test . T o go back
to the functions without any changes press the MENU button again. Hold and press the MENU button for one
second or wait for one minute to exit the menu mode.
FIXTURE HOURS
T o select Fhrs, press the ENTER button to show the FIXTURE HOURS on the display and the display will show the
number of working hours of the unit . T o go back to the functions without any changes press the MENU button again.
Hold and press the MENU button for one second or wait for one minute to exit the menu mode.
SOFTWARE VERSION
T o select Ver, press the ENTER button to show the SOFTWARE VERSION on the display and the display will show
the version of software of the unit . T o go back to the functions without any changes press the MENU button again.
Hold and press the MENU button for one second or wait for one minute to exit the menu mode.
RESET
T o select rSet, press the ENTER button to show the RESET on the display. Press the ENTER button and all channels
of the unit will return to their standard position.
OPERATING
MASTER SLAVE OPERATING
By linking the units in master/slave connection, the first unit will control the other units to give an automatic, sound
activated, synchronized light show. This function is good when you want an instant show. You have to set the first
unit in master mode M a s t and select S h 0 (random show),
input jack will have nothing plugged into it, and its master LED will be constantly on and sound LED will flash to the
music. The other units will have to select Sl1 (normal) or Sl2 (2 light show) mode, Their DMX cables plugged into
the DMX input jacks (daisy chain) and the slave LED lights will be constantly on.
Sl2 :
In slave mode, M a s t means the unit works as the master unit and Sl2 means 2‐light show. In order to create a
© Copyright LOTRONIC 2015
Sh1 (show 1) or ...or S h 8 (show 8). Its DMX
8BEAM-FX Page 7