afx light 8BEAM-FX Manuel D'utilisation page 5

Effet a leds
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MENU
T o select any functions, press the MENU button until the required function is showing on the display. Select the
unction by pressing the ENTER button and the display will blink. Use the DOWN and UP button to change the mode.
Once the required mode has been selected, press the ENTER button to setup to go back to the functions without any
changes press the MENU button again. Hold and press the MENU button for one second or wait for one minute to exit
the menu mode.
The main functions are shown below:
ADDR
A001-A512
CHND
10CH,36CH
SLND
MAST, SL1, SL2,
SHND
SH0---SH25
SOUND
ON /OFF ,
SENS
SOUND SENS SELECTION , 0 IS OFF. 100 IS THE STRONGEST
BLND
YES, NO , BLACKOUT MODE
LED
ON,OFF . BACKGROUND LIGHT
DISP
YES,NO .
TIL 1
YES ,NO . MOTOR 1
TIL 2
YES , NO, MOTOR 2
TEST
AUTO TEST
FHRS
0—9999
VER
V101
RESET
YES , NO .
DMX 512 ADDRESS
T o select Addr, press the ENTER button to show the DMX ADDRESS on the display. Use the DOWN/UP button to
adjust the address from 1 to 512. Once the address has been selected, press the ENTER button to setup, to go
back to the functions without any changes press the MENU button again. Hold and press the MENU button for one
second or wait for one minute to exit the menu mode.
CHANNEL MODE
To select Chnd, press the ENTER button to show the DMX CHANNEL MODE on the display.
Use the DOWN/UP button to select the , 10/36channel modes. Once the mode has been selected, press the
ENTER button to setup, to go back to the functions without any changes press the MENU button again. Hold and
press the MENU button for one second or wait for one minute to exit the menu mode.
SLAVE MODE
T o select Slnd, press the ENTER button to show the SLAVE MODE on the display. Use the DOWN/UP button to
select Mast (MASTER),Sl1 (SLAVE 1), Sl2 (SLAVE 2) modes. Once the mode has been selected, press the
ENTER button to setup, to go back to the functions without any changes press the MENU button again. Hold
and press the MENU button for one second or wait for one minute to exit the menu mode.
© Copyright LOTRONIC 2015
DMX ADDRESS
CHANNEL MODE
MASTER SLAVE MODE
, SHOW MODE
SOUND MODE
DISPLAY
INVERSION
INVERSION
INVERSION
FIXTURE HOURS
SOFTWARE VERSION
FACTORY SETING
8BEAM-FX
Page 5

Publicité

Table des Matières
loading

Table des Matières