KSR KUEBLER BNA Mode D'emploi page 16

5. Trouble shooting
5. Trouble shooting
The following table contains the most frequent causes of faults and the
GB
necessary countermeasures.
Fault
Bypass level
indicator cannot
be fitted at the
planned place on
the vessel
Please contact us if you have any difficulties. We will be happy to help
any way we can.
16
Cause
Thread size or flange size of
the bypass level indicator do
not correlate
Thread on the fastening slee-
ve on the vessel is faulty
Mounting thread on the by-
pass level indicator is faulty
Centre to centre distance of
the vessel does not correlate
with the bypass level indicator
Process connections are
not attached parallel to one
another
KSR KUEBLER Operating Instructions Bypass Level Indicator – BNA
Measure
Modification of the vessel
Return to the factory
Rework the thread or replace
the fastening sleeve
Return to the factory
Modification of the vessel
Return to the factory
Modification of the vessel