Lincar Stella Instructions D'utilisation Et D'entretien page 60

IT-GB-FR mod. 740-740 ECO-740/SA-740/SA ECO-740N/SA
APPPLIANCE REGULATION
(to be completely carried out before effecting the 1st Lighting)
REGULATION of Heating water Temperature.
The appliance is provided with a thermostat put on the boiler for the control of the water
temperature sent to the plant, this thermostat reduces progressively the power of the appliance
(modulation) whenever the temperature of the water inside the boiler has reached the selected
temperature.
TO SELECT Water temperature (boiler)
- Push on button 1
-Regulate the temperature of plant utilizing the buttons P1 and P2
-Terminate the regulation of the temperature of the water pressing
shortly on button P4, the modification will be memorized and the disply
returns to the previous indication
REGULATION of Domestic water Temperature [not applicable for 740/SA -740/SA ECO
740N/SA ]
The appliance is provided with a thermostat for the control of the temperature of domestic
water, this thermostat regulates the power of the appliance in order to maintain the
temperature of the domestic water whenever required, it is suggested to keep this temperature
higher by 10°C in respect of the temperature of the water for the heating plant.
The production of domestic water occurs by mean of the use of a rapid exchanger, when
warm water is requested a feeler transfers this request to the appliance, which increases the
power to the max. level to satisfy the request and the power modulation will start as soon as
the selected value of domestic water temperature has been reached.
TO SELECT domestic water temperature
- Push on button 6
-Regulate the temperature of plant utilizing the buttons
P1 and P2
-Terminate the regulation of the temperature of the water pressing
shortly on button P4, the modification will be memorized and the display returns to the
previous indication
REGULATION of the Power of the appliance.
The appliance has the possibility to be regulated within a range of 5 power levels (1-min, 5-
max), during the first working hours we suggest to put the power regulation on level 3.
The appliance will use the selected power value as maximum value for the function of heating
of the plant, in this way it is possible to restrict the max. power of the appliance.
In any case if the selected power permits to the boiler temperature to reach the selected value,
the appliance will automatically reduce the power (modulation) in order to reduce the
consumption of the fuel.
- Push on P5
- Regulate the power of the appliance utilizing the buttons P5 o P6
- Terminate the regulation of the temperature of the water pressing
shortly on button P4, the modification will be memorized and the
display returns to the previous indication
60/120