Dorel Asia DA1008TFBB-1 Mode D'emploi page 11

TWIN/FULL BUNK BED
DA1008TFBB-1, DA1008TFBB-2
3
STEP 3
Insert wood dowels (7) into the ends of twin headboard top cross (U) and twin headboard
bottom cross (W). Insert twin headboard panel (V) into the grooves of the twin headboard
top cross (U), then push the twin headboard bottom cross (W) up to firmly secure it in
place. Attach top posts (A & B) using wood joint connectors (3) as shown. Tighten the wood
joint connectors (3) with the hex key (8).
Repeat this step to assemble the other twin headboard using top posts (A & C).
NOTE: Be sure to use twin headboard top cross (U) with warning label attached to it
between top posts (A) and (C). See illustration for label orientation.