Keysight Technologies P Série Guide D'utilisation page 16

Manufacturer's Name:
Manufacturer's Address:
Declares under sole responsibility that the product as originally delivered:
Product Name:
Models Number:
Product Options:
complies with the essential requirements of the following applicable European Directives, and
carries the CE marking accordingly:
Low Voltage Directive (2006/95/EC)
EMC Directive (89/336/EEC, amended by 93/68/EEC)
and conforms with the following product standards:
EMC
Standard Standard Standard Standard
IEC 61326:2002 / EN 61326:1997+A1:1998+A2:2001+A3:2003
CISPR 11:1990 / EN55011:1990
IEC 61000-4-2:1995 / EN 61000-4-2:1995
IEC 61000-4-3:1995 / EN 61000-4-3:1996
IEC 61000-4-4:1995 / EN 61000-4-4:1995
IEC 61000-4-5:1995 / EN 61000-4-5:1995
IEC 61000-4-6:1996 / EN 61000-4-6:1996
IEC 61000-4-11:1994 / EN 61000-4-11:1994
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS CISPR11:2004
The product was tested in a typical configuration with Agilent Technologies test systems.
IEC 61010-1:2001 / EN 61010-1:2001
Safety
Canada: CAN/CSA-C22.2 No. 61010-1-2004
USA: ANSI/UL 61010-1:2004
Supplementary Information:
This DoC applies to above-listed products placed on the EU market after:
8 June 2007
Template: A5971-5302-2, Rev. D.00
xiv
Agilent Technologies Microwave Products (M) Sdn. Bhd
Bayan Lepas Free Industrial Zone,
11900, Bayan Lepas, Penang, Malaysia
P-Series Modular Power Meter
N8262A
This declaration covers all options of the above product(s)
Date
For further information, please contact your local Agilent Technologies sales office, agent or distributor,
or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, 71034 Böblingen, Germany.
DECLARATION OF CONFORMITY
According to EN ISO/IEC 17050-1:2004
Generic example
Limit Limit Limit Limit
Class A Group 1
4 kV CD, 8 kV AD
3 V/m, 80-1000 MHz
0.5 kV signal lines, 1 kV power lines
0.5 kV line-line, 1 kV line-ground
3 V, 0.15-80 MHz
1 cycle / 100%
Mack Soh
Quality Manager
N8262A DoC Revision 1.0