Setup - Textron Greenlee UT2 Manuel D'instructions

Setup

Place puller in approximate position of conduit.
Align nose with conduit and lock it in place with long
detent pin.
Greenlee / A Textron Company
UT2 Cable Pulling System
Butt nose up against conduit threads and conduit
locking nut. Place clamping plate inside of conduit and
tighten knurled nut. Take lock nut off temporarily for
more thread engagement if needed.
If the conduit is free standing or without threads, position
the nose so that the conduit will butt up against the flats
of the clamping plate.
8
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070