III - PROPULSION SYSTEM
Comply with BOMBARD's recommendations and the engine manufacturer's recommendations
regarding engine assembly.
To get the best out of your boat, please consult your dealer.
The engine bolts must be fitted through the transom using a screw hole sealing procedure (e.g: using
Sikaflex sealant).
In twin engine systems, position the engines as close as possible together. Please consult the engine
user manual to determine the minimum centre distance (a) given by the manufacturer.
PROPULSION SYSTEM
a
Page 15 / 43
E
N
G
L
I
S
H
-
First edition