Open And Fold The Scooter - VELOCIPTOR ES 80W SKILL Manuel De L'utilisateur

OPEN AND FOLD THE SCOOTER

How to fold VELOCIPTOR ES 80W
1. Push the safety lock upwards (it is located on the lower part of the handlebar
support tube) as shown in Fig 1 and 2, then pull the red release lock as indica-
ted by the arrow below, Fig 3, pushing forward (towards the front wheel) the
handlebar support tube in order to facilitate release;
2. Guide the handlebar tube towards the rear wheel until you hear the click, see
Fig 4;
3. You can now transport your scooter by grasping the handlebar support tube
Fig 1
How to open VELOCIPTOR ES 80W
4. With the scooter closed as shown in Fig 4 release the handlebar, pushing
the safety lock upwards located on the lower part of the handlebar support
tube, as shown in Fig 1 and 2, then pull the red release lock as indicated by
down arrow, Fig 3;
5. Bring the handlebar tube to the vertical position, being careful to keep
the platform stationary;
6. VELOCIPTOR ES 80W will be correctly opened as soon as you hear the
click of the handlebar tube in position;
Fig 2
21
Fig 3
Fig 4