Installation Of The Handlebar - VELOCIPTOR ES 80W SKILL Manuel De L'utilisateur

installation of the handlebar

1. Before using VELOCIPTOR ES 80W, it is necessary to assemble the
handlebar knobs on the main frame of the vehicle. First of all, take
the vehicle chassis out of the box. Insert the threaded part of the first
knob (right or left) in the respective hole on the sides of the frame.
Then, holding the main frame still, screw clockwise or counterclockwi-
se (see images below) until the threaded part of the knob is comple-
tely inserted on the handlebar support.
2. Turn the handlebar grips and carefully check all the components to
make sure that the steering is installed correctly and that all the con-
necting parts are safe and fully functional
Left knob
Screw counterclockwise Screw clockwise
20
Right knob