Venga VG RVC 3002 Mode D'emploi page 19

5. Wash the dust collector frame and
make sure it is empty and clean.
B. Emptying and cleaning the water tank
1. Press the release button to remove
the water tank. Take the dust
collector out from the water tank
assembly.
3. Remove the primary filter by grasping
the yellow tab and take out the HEPA
filter from it.
5. Wash the dust collector frame and
make sure it is empty and clean.
6. Once the dust collector frame is fully
dry, put the filters back in place.
2. Open dust collector's hatch to
empty it.
4. Shake off debris and dust from
the filters.
6. Once the dust collector frame is
fully dry, put the filters back in
place.
19 VG RVC 3002