Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Technical Data
CORDLESS DRILL DRIVER
Nominal voltage
Chuck size
Max. torque
No load speed (n
)
0
Torque setting
Max. drilling capacity
Sound pressure level (L
)
pA
Sound power level (L
)
WA
Max. vibration emission (a
)
hd
Machine weight
SUITABLE BATTERIES
Voltage
Capacity
CHARGER
Nominal voltage
Output voltage
Charging time
Operation temperature
Protection Class
Weight
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure.
150
EN
PE-20DDB
20 V
10 mm
30 Nm
1
Gear
0-400 bpm
st
2
nd
Gear 0-1450 bpm
18 + 1 drill .
Wood
25 mm
Steel
10 mm
68.1 dB(A) Uncertainty K = 3 dB(A)
80.5 dB(A) Uncertainty K = 3 dB(A)
2.02 m/s
/ Uncertainty K = 1.5 m/s
2
2
1.2 kg
PE-AK2 (6801240 included)
PE-AK4 (6801241 optional)
20 V
PE-AK2 (6801240): 2.0 Ah Li-ion battery
PE-AK4 (6801241): 4.0 Ah Li-ion battery
PE1H (included)
100-240 V ~ 50/60 Hz, 78 W
14.4-20 V
3.0 A
60 min for PE-AK2
120 min for PE-AK4
10-40 °C
/ II
0.25 kg
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the tool.
Battery information
The battery is supplied partially charged. Com-
pletely charge the battery before using the tool
for the first time. The lithium ion battery can
be charged at any time without reducing its
service life. Interrupting the charging proce-
dure does not damage the battery.
The battery is protected against deep dis-
charging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the tool is
switched off by means of a protective circuit.
Therefore do not press the on / off switch
Care & Maintenance
Warning! If the tool is not in use,
centre the rotation direction switch,
in order to lock the tool.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
after the machine has switched off automati-
cally. The battery can be damaged.
Due to the NTC temperature control, the bat-
tery can only be charged at temperatures be-
tween 10 °C and 40 °C.
If the temperature exceeds 70 °C during op-
eration the tool is switched off by means of
a protective circuit. Once the temperature is
between -10 °C and 70 °C, the tool can be
3
operated normally.
Disposal
The crossed-out wheeled bin logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Such equipment may
contain dangerous and hazardous substanc-
es. These tools must be returned to a desig-
nated collection point for the recycling of
WEEE and must not be disposed as unsorted
municipal waste. By doing so, you will help to
conserve resources and protect the environ-
ment. Contact your local authorities for more
information.
Children must not play with plastic bags and
packaging material, due to possible injury or
danger of suffocation. Store such material
safely or dispose of environmentally friendly.
Used batteries must be disposed of properly.
Battery selling stores and municipal collection
points offer special containers for battery dis-
posal.
EN
151
Publicité
Chapitres
Table des Matières
