Publicité
Les langues disponibles
Les langues disponibles
How To Use
Step 1: Charge the GB500.
The GB500 comes partially charged out of the box and needs to be fully charged prior to use.
Connect the GB500 using the included 12V Adapter or 56W XGC Power Adapter to the 12V IN
port. The GB500 must be in 12V mode to be charged. Ensure the voltage selection knob is in
the 12V position prior to charging. The XGC 12V IN port is rated at 12V, 5A to ensure safe and
efficient charging of the internal lithium battery. Due to FCC regulations, we recommend not to
charge and discharge the unit at the same time. The time to recharge a GB500 will differ based on
the discharge level and the power source used. Actual results may vary due to battery conditions.
When recharging, the charge level of the internal battery is indicated by the Charge LEDs. The LEDs will slowly
pulse "On" and "Off", and become solid until all four Charge LEDs are on. When the battery is fully charged, the
Green 100% LED will be solid, and the 25%, 50% and 75% Charge LEDs will turn "Off". From time to time, the
25% 50% 75% 100%
Green 100% LED will pulse indicating maintenance charging is occuring.
12V DC Charging (60W).
The GB500 must be in 12V mode to be charged. Ensure the voltage selection knob is in the 12V position prior to charging. Connect
the 12V Cable to the 12V IN port on the GB500, and the other end to the Male 12V Plug. Plug into a powered 12V AUX Plug (Cigarette
Lighter Port).
AC Charging (56W).
The GB500 must be in 12V mode to be charged. Ensure the voltage selection knob is in the 12V position prior to charging. Connect the
XGC 12V Cable to the 12V IN port on the GB500, and the other end of the 56W Power Adapter to AC power (100-240VAC Wall Outlet).
Powering Your 12V Devices.
The GB500 must be in 12V mode to enable 12V OUT. Connect the 12V Cable to the 12V OUT port on the GB500, and the other end
to the Female 12V Plug (12V AUX / Cigarette Lighter Port). Plug-in any standard 12V device (up to 15A) with a 12V plug and turn the
GB500 "On" to start powering your device.
Recharge Time: 6-8hr
Using 12V DC Cable or AC Power
Adapter to recharge a fully discharged
unit. Recharge time will vary based on
level of discharge.
EN
Publicité
