Publicité
Les langues disponibles
Les langues disponibles
11. Low Battery Indicators.
1. The interior LED
● Regardless of switch #1 position, under "Low Battery" condition - red
LED will flash every 5 seconds.
2. The exterior Keypad (when switch #3 is OFF).
● After a correct code is entered, the keypad will flash red multiple times
for approximately 3 seconds.
3. The Audio Indicator (when switch #3 is in the ON position).
● After a correct code is entered the unit beeps multiple times for ap-
proximately 3 seconds.
Note: For future battery replacement, remove battery pack, replace batter-
ies (see section 7) and simply reinsert battery pack as shown, a beep and
a Green LED flash will indicate a successful system initialization. No bolt
direction determination is required after the initial installation unless the lock
is re-installed on a different door.
12. Keypad Lights.
a. Keypad Back Light
●
When the door is in the locked position, press the lock button to light up
the keypad. In a "very low battery" condition the keypad will not light up.
b. Keypad light signals
●
Switch 3 off – the keypad will flash red every time you press a button.
●
Low Battery Warning –
flash red multiple times for approximately 3 seconds.
Bolt not fully extended – the keypad will light up red, the beeper will
●
sound for 3 seconds. This will alarm the user to try and lock the door
again.
Incorrect Codes Entered – when three incorrect codes are entered into
●
the SmartCode the keypad will flash red and the beeper will sound for
15 seconds. The keypad will not allow imput for 60 seconds after which
you can re-enter a code and try again.
WARNING: This Manufacturer advises that no lock can provide
complete security by itself. This lock may be defeated by forcible or
technical means, or evaded by entry elsewhere on the property. No lock
can substitute for caution, awareness of your environment, and common
sense. Builder's hardware is available in multiple performance grades
to suit the application. In order to enhance security and reduce risk, you
should consult a qualified locksmith or other security professional.
8
After a correct code is entered, the keypad will
Publicité
