Cleaning; Storage; Disposal; Trouble Shooting - Zipper Maschinen ZI-LPE18-AKKU Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12.1 Cleaning

Once a month the machine and all its parts must be thoroughly cleaned.
The usage of certain solutions containing ingredients damaging metal surfaces as well as
the use of scrubbing agents will damage the machine surface!
Never use running water or a high pressure cleaner to clean the machine.
 After each use, clean the machine using a dry cloth or a brush if the machine is very dirty.
 Keep the ventilation slits clean and dustfree.

12.2 Storage

 Store the machine in a dry and frost-free place (10-25 °C).
 Store the battery and the machine separately.
 Charge the battery before storing the machine in winter.
 Keep the machine, in particular its plastic components, away from brake fluids, petrol, petroleum
products, penetrating oil, etc. They contain chemical substances which may damage, attack or
destroy the plastic components of the machine.
 Fertilisers and other garden chemicals contain substances which may have a highly corrosive effect
on the metal parts of the machine. Therefore do not store your machine near these substances.

12.3 Disposal

Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a
replacement unit, the latter is obliged to exchange your old.
13

TROUBLE SHOOTING

BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, UNPLUG THE BATTERY!
Trouble
Motor does not start
Battery cannot charged
anymore
Should you in necessary repairs not able to properly to perform or you have not
the prescribed training for it always attract a workshop to fix the problem.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-LPE18-AKKU
N O T I C E
Possible cause
 Battery is not plugged in
 Battery is not charged
 Switch is damaged
 Contact failure
 Battery damaged
N O T I C E
TROUBLE SHOOTING
Solution
 plug in battery
 Recharge battery
 Check switch
 Check contact pins
 Change battery
20

Publicité

Table des Matières

Dépannage

loading

Table des Matières