Operation; Operation Instructions; Inserting/Replacing The Battery - Zipper Maschinen ZI-LPE18-AKKU Mode D'emploi

11

OPERATION

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.

11.1 Operation instructions

 Never charge batteries at temperatures below 0 °C or above 40 °C.
 Do not charge batteries in an environment which has high air humidity or at a
high ambient temperature.
 Do not cover batteries and/or the battery charger during the charging process.
 Use only original batteries in the supplied battery charger
 Battery and charger heat up during the charging process. This is perfectly normal!
 Never remove the battery while the machine is running
 The device should only be used for a maximum continuous duration of 5 minutes.
After 5 minutes it should be allowed to cool down.
 Before inflating an item, first determine its own particular pressure value.
 Items to be inflated should be held firmly or clamped.
 Ensure that there is a proper connection between the device and the item to be
inflated.
 The air connector and adapter must always be kept clean
11.2 Operation

Inserting/replacing the battery:

 Charging the battery as described in the
user manual
 Press the charged battery into the power
tool until it clicks into place.
 To remove, press the release button and
pull out the battery.
Air hose und adapter:
 Depending on the application the air
hose and adapters can be stored in the
support.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-LPE18-AKKU
W A R N I N G
OPERATION
18