Whittier Wood Furniture 558Wa Instructions De Montage page 6

U
7. Using the predrilled holes as guides, secure the Back Assembly (Ga) to the Frame Assembly with
#8x20mm Pan Head Screws (U). See Figure 7.
Fig. 8
8. Determine where you want the bottom of your storage shelf to end and draw a faint pencil line
on the wall. Using a tape measure, measure up 15 inches from that line. Draw another faint line.
The top line is where you will attach the Wall Brackets (K). Erase the faint bottom pencil mark.
See Figure 8.
558Wa — 03/10 — Page 6
Fig. 7
U
U
Ga

U
U
x 10

Wall