Télécharger Imprimer la page

Publicité

Liens rapides

Model #
558Wa
Westport Storage Shelf
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions and Finishing Hints before
you begin your project.
CALL US FIRST!
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
800-653-3336
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
• Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended
for commercial use.
Do not climb or stand on this piece of furniture.
Unload items before you move this unit.
Do not overload this unit.
Before you load or move this unit, check all screws
and supports for tightness.
Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
Do not return this item to the store.
To Order: Provide the furniture model number (upper
left corner of this page), the part letter, production
code, quantity needed, reason for replacement, your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
Production Code:
VN
.
03/10

Publicité

loading

Sommaire des Matières pour Whittier Wood Furniture 558Wa

  • Page 1 Model # 558Wa Westport Storage Shelf Assembly Instructions IMPORTANT NOTES: For normal household use only. Not recommended for commercial use. Do not climb or stand on this piece of furniture. Unload items before you move this unit. Do not overload this unit.
  • Page 2 558Wa Westport Storage Shelf — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. Aa — Top Assembly — Qty. 1 B —...
  • Page 3 Left Side (C) to the Bottom Shelf Assembly with two #8x1-3/16" Pan Head Screws (T), making sure the square notches on the Left and Right Dividers face the back and the curved notch on the Left Side faces the front. See Figure 2. 558Wa — 03/10 — Page 3...
  • Page 4 Assembly (Ga) as shown in Figures 4 and 4a. Quickly wipe away any excess glue. Using the pocket holes as guides, attach using four #8x1-3/16" Pan Head Screws (T). See Figures 4, 4a and 4b. 558Wa — 03/10 — Page 4...
  • Page 5 3x12mm Pan Head Screws (L). Using the predrilled holes as guides, attach the five Small Hooks (I) to the bottom of the shelf assembly with five 3x12mm Pan Head Screws (L). See Figures 6 and 6a. 558Wa — 03/10 — Page 5...
  • Page 6 Using a tape measure, measure up 15 inches from that line. Draw another faint line. The top line is where you will attach the Wall Brackets (K). Erase the faint bottom pencil mark. See Figure 8. 558Wa — 03/10 — Page 6...
  • Page 7 10. NOTE: The Wall Brackets (K) attached to the wall angle out at the top. See Figure 10. When you hang your storage shelf, the Wall Brackets (K) that are pre-attached to the shelf fit over the angled part of the Wall Brackets on the wall. See Figure 10a. 558Wa — 03/10 — Page 7...
  • Page 8 Angle Bracket (R) to the storage shelf with two #8x1-3/16" Pan Head Screws (T). Replace the storage shelf on to the wall and secure the Angle Bracket to the wall with two #8x1-3/16" Pan Head Screws (T). See Figure 11. 558Wa — 03/10 — Page 8...
  • Page 9 Modelo # 558Wa Estante para Almacenaje Westport Instrucciones para Armar NOTAS IMPORTANTES: Sólo para uso doméstico. NO se recomienda para uso comercial. No se suba, no se siente ni se pare sobre este mueble. No sobre cargue este mueble. Antes de mover este mueble, saque su contenido.
  • Page 10 Vea la Figura 2. tornillos de cabeza troncocónica #8x1-3/16" (T). Vea la Figura 1. Page 2 SP — 558Wa — 03/10...
  • Page 11 (Ga) al conjunto del marco con tornillos tornillos de cabeza troncocónica #8x1-3/16" (T). Vea la de cabeza troncocónica #8x20mm (U). Vea la Figura 7. Figura 11. Page 3 SP — 558Wa — 02/10...
  • Page 12 No. de Modèle 558Wa Étagères de Rangement Westport Instructions de Montage REMARQUES IMPORTANTE: Pour usage ménanger normal seulement. N’est pas recommandé pour usage commercial. Ne grimpez pas, ne vous asseyez pas ou ne vous tenez pas debout sur ce meuble.
  • Page 13 En vous servant des petits trous sont face à l’avant. Voir la figure 2. forés comme guides, fixez-les solidement au moyen de quatre vis à tête cylindrique no. 8 x 1-3/16 po (T). Voir la figure 1. Page 2 FR — 558Wa — 03/10...
  • Page 14 à tête cylindrique no. 8 x 1-3/16 po moyen des vis à tête cylindrique no. 8x20mm (U). (T). Voir la figure 11. Voir la figure 7. Page 3 Fr — 558Wa — 03/10...
  • Page 15 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
  • Page 16 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.