Publicité
Ga
3. Spread a thin layer of glue in the dowel hole on the Left Side. Insert the Back Assembly (Ga)
as shown in Figures 3 and 3a. Quickly wipe away any excess glue. Using the pocket holes as guides,
attach using two #8x1-3/16" Pan Head Screws (T). See Figures 3 and 3a.
B
T
Fig. 4a
4. Spread a thin layer of glue in the three dowel holes on the Right Side (B). Insert the Back/Shelf
Assembly (Ga) as shown in Figures 4 and 4a. Quickly wipe away any excess glue. Using the pocket
holes as guides, attach using four #8x1-3/16" Pan Head Screws (T). See Figures 4, 4a and 4b.
558Wa — 03/10 — Page 4
Fig. 3
Fig. 4b
T
T
T
T
T
T
Fig. 3a
Ga
Fig. 4
T
x 2
T
T
x 4
Publicité
