EXALTA TRECENTO12 Manuel D'instruction page 17

In order to grant a long and good performance to the appliance, it is
advisable to clean and oil often the appliance.
For an easy cleaning it is possible to remove the cutting blades.
Open the cutting unit by pushing it backwards (as shown in the picture).
Remove hair from the cutting blade using the cleaning brush, reassemble
the cutting unit, put 2 o 3 oil drops and allow the machine to run for
several seconds so that the unit can lubricate properly.
SYMBOL
Class II appliance.
This item is made in conformity with all the applicable European
directives
TECHNICAL FEATURES
Stainless steel blades
Adapter
Input: 230-240V AC 50Hz
Output: 3V DC 600mA
Battery: 2X AA 550mAh NI-MH
DISPOSAL
The device (including its removable parts and accessories) must
not be disposed of together with municipal waste at the end of
its life, but in compliance with European Directive 2012/19/EC.
Since it must be handled separately from household waste, either carry it
to a separately-collected waste disposal centre for electrical and electronic
appliances or give it back to the retailer on purchasing a new device with
the same purpose. Any infringement will be severely prosecuted.
17