Operating; Splitting Lever; Splitting - Zipper Maschinen ZI-HS16E Manuel D'utilisation

16.2

Operating

16.2.1 Splitting lever

Splitting force and splitting speed are controlled by the splitting lever. The splitting lever is simply
raised or lowered for operation.

16.2.2 Splitting

ZIPPER MASCHINEN GmbH
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
Phase inverter
The first half stroke of the splitting lever is idle speed; press the
splitting lever to the half stroke for maximum splitting force at
slower speed to split the log at the beginning or particularly hard
and seasoned logs.
Press the splitting lever to the end for faster speed at less splitting
force to finish the splitting or to split usual logs.
www.Zipper-Maschinen.at
Check the rotation direction of the motor if necessary
please change direction by using the phase inverter.
(phase inverter inside the plug - see picture on the left)
1. Place the log vertically on the support table, so
that it lies flat on its face. Press the left lever
to lower the extended log fixing claw against
the log to secure it. The extended log fixing
claw can be adjusted to fit logs with different
heights.
OPERATION
42