Front Panel - Nagra CLASSIC PREAMP Manuel De L'utilisateur

Front panel

1 2
1. LED and Modulometer light intensity switch. Push up for more intensity,
push down for less intensity. There are 7 intensity levels
2. Nagra Modulometer. Indicates the output level in dB, reference 0 dB = 1
3. LCD display
4. Controller knob. Source selection and browsing through menu.
5. Gain selection. Standard position 0 dB, upward position +12 dB
6. Volume potentiometer
7. Line out selection. XLR, RCA or HEADPHONES positions.
8. Nagra rotary main selector
9. ¼" jack Headphones output
10. IR window and remote LED
When turned ON, the CLASSIC PREAMP will enter a 2.5 minutes
preheating time in order to optimize the tubes and critical
components warm-up. This will allow your CLASSIC PREAMP to
offer excellent performance for a longer period of time.
Please note that you can access the menu while the unit is
warming-up.
Note: In case of an accidental return to the OFF position for less
than 2 seconds, the pre-heating is not re-applied.
3
33
NAGRA – CLASSIC PREAMP
4 5 6 7 8 9 10