Before The First Use; Usage - Inventum EDKV142WA+ Mode D'emploi

3

before the first use

Before using the appliance for the first time, you should proceed as follows: carefully unpack the appliance and remove all
packaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out of the
reach of children. After unpacking the appliance, check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventilation. A
minimum space of 10 cm is required between the appliance and the surrounding walls. In this way the appliance is able
to release heat properly, cool well and function in an energy efficient way. You can use the adjustable feet to level the
appliance. Do not place the appliance near heat sources such as central heating or a stove. Do take note of the climate class
of the appliance. When placed in a room that is too cold, the refrigerator will not function properly.
After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours.
4

usage

The appliance features internal controls. Check whether the thermostat is off. Check that the voltage in your home
corresponds with the voltage printed on the back of the appliance and plug it in a socket.
Temperature settings
Setting OFF = appliance is off
Setting MIN = minimum - low cooling temperature
Setting MED = medium - normal cooling temperature
Setting MAX = maximum - high cooling temperature
Set the temperature with the thermostat knob and choose a setting between MIN and MAX. We advise to set the appliance
on setting MED. The appliance now cools continuously until the set temperature has been reached. Do not place anything
in the appliance until the set temperature is reached. This usually takes 2 or 3 hours. Then set the thermostat at the desired
setting and place food into the refrigerator.
Set the appliance on a higher setting when the ambient air temperature rises to maintain the temperature inside the
appliance.
To turn the appliance off, turn the thermostat to the [ OFF ] setting.
Note:
The ambient air temperature, how often the door is opened and the position of the appliance can affect the internal
temperature. These factors must be taken into account when setting the thermostat.
• Do not put hot food into the refrigerator.
• Never introduce volatile, inflammable or explosive fluids such as alcohol, acetone or petrol because of the risk of
explosion.
• It is advisable to wrap meat and fish to avoid odours.
• Leave sufficient space between the food to enable air to circulate correctly between them. Similarly, when storing them,
avoid puttin food items in contact with each other.
• Do not place food items in contact with the cold wall at the back of the appliance. The shelves have a stop to avoid this.
• The door should not be left open any longer than necessary.
22
• English