Appliance Description; Before The First Use - Inventum MDR2600 Mode D'emploi

2

appliance description

1. Internal lighting
2. Glass shelves
3. Fresh box drawer
4. Crisp drawer
5. Freezer drawers
6. Adjustable feet
7. Door - freezer section
8. Door - cooler section
9. Bottle compartment
10. Door compartments
11. Egg tray - 2 pcs. - not shown
12. Ice cube tray - not shown
3

before the first use

Before using the appliance for the first time, you should proceed as follows: carefully unpack the appliance and remove all
packaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out of the
reach of children. After unpacking the appliance, check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough
space all around for sufficient ventilation. A minimum space of 10 cm is
required between the appliance and the surrounding walls and keep 30 cm
clear above the appliance. In this way the appliance is able to release heat
properly, cool well and function in an energy efficient way. You can use the
adjustable feet to level the appliance. Do not place the appliance near heat
sources such as central heating or a stove. Do take note of the climate class
of the appliance. When placed in a room that is too cold, the refrigerator will
not function properly.
After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours.
26
• English
1
2
3
4
5
6
300 mm
10
9
8
7