Velleman VSC1 Notice D'emploi page 3

1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a Velleman product! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
"AUTO"-operation is activated
"MAN"-operation is activated
Device is OFF
Special screw terminal with detachable connector in order to facilitate the installation of the device.
2. Technical Specifications
Pan Control
Power Supply
Input Voltage
Output Voltage to Scanner
Operating Temperature
Connector
Material & Colour
Dimensions
Weight
3. Controls
FRONT PANEL
1. Power : Place the rocker switch in the "AUTO"-position to make the green LED light up. The scanner will now
make all necessary left-right adjustments automatically. Put the rocker switch in the "MAN"-position to
make the red LED light up. The position of the scanner will now have to be adjusted manually. No
LEDs are lit if the device is OFF.
2. LEFT and RIGHT
VSC1
VSC1 – SCANNER CONTROL BOX
: green LED is lit
: red LED is lit
: no LEDs are lit
"LEFT/RIGHT" paddle switch
"MAN/AUTO/OFF" rocker switch
220-230VAC
24VAC
-5 to +60°C
Detachable screw terminal
Steel, off-white
212mm (D) x 218mm (W) x 45mm (H)
1.0kg
: paddle switch used to make the scanner turn to the left or right.
3 VELLEMAN