Lenovo PHAB2 Pro Guide De Démarrage Rapide page 5

Preparing your device
A Nano-SIM card provided by your carrier is required in order to use cellular services
microSD card is required to store data
Install the Nano-SIM cards and microSD card as shown
Step 1. Insert the eject tool that comes with your device into the hole in the card tray.
Step 2.
Pull out the card tray and do one of the following:
Insert a Nano-SIM card into Slot 1 and a microSD card into Slot 2;
Insert a Nano-SIM card into Slot 1 and another Nano-SIM card into Slot 2
Step 3. Carefully insert the tray with the installed cards back into the slot.
① Only Nano-SIM cards work with your device.
② Only microSD cards formated with FAT32 work with your device. You might need
to format your microSD card before using by following the instructions on the
screen.
③ Always turn off your device first before you insert or remove a Nano-SIM card.
Insert or remove a Nano-SIM card with your device on may damage your
Nano-SIM card or device permanently.
④ Both of the card slots support 4G/3G/2G data services, but you can enable only
one Nano-SIM card for data connection at a time.
.
②
③
3
.
. A
①
.
④