Changing A Value (Parameter); The Menu Men; Status Display Stat - Technische Alternative ESR 21 Mode D'emploi

Changing a value (parameter)

Value
blinks
If a value is to be changed, press the arrow key. This value will then blink and can be set
to the desired value with the navigation keys.
Use the arrow key up to save the value.

The menu Men

The menu contains basic settings to specify additional functions such as sensor type, func-
tion check, etc. Navigation and changes are done as usual with the keys , while the
dialogue is only set up in the text line.
ENGL Language selection: The entire menu can be switched to the desired user lan-
guage even before the code is provided. The following languages are available:
German (DEUT) and English (ENGL).
As the settings in the menu can change the basic features of the control unit, only a tech-
nician who has the code can open this level.
The entire instruction manual with detailed description of possible adjustments of the
menu "men" can be downloaded from: www.ta.co.at section DOWNLOADS

Status display Stat

The status display provides information in special system situations and problems. It is
mostly intended for use with solar thermal systems, but can also be useful with other dia-
grams. The status display can then only operate if an active function check is set off via de-
fective sensors S1 or S3.
Collector excess temperature is active = the excess temperature that occurs during system
standstill only leads to the display CETOFF (the collector's excess-temperature cutoff is
active) during this time under Stat.
10
Value
blinks
Value
blinks