Nannio Eye Manuel De L'utilisateur page 14

3
Menu Options
1. Press the menu button
the screen (See Fig. 13).
2. Use the brightness down
through the menu.
3. Press the Zoom/OK
4. The main menu contains 5 submenus.
3
.1 Camera Selection ( Camera Select )
In this submenu you can select between multiple cameras if the cameras have
been paired. Also, you can tap the auto-scan icon
An auto-scan feature will display images from each camera in eight-second
intervals. (See Fig. 14).
3
.2 Feed Timer Setting ( Feed Timer )
In this submenu you can set up feed timer to remind you the timing (See Fig.
15).
3
.3 Camera Setting ( Camera Setting )
The system comes with a camera unit that has already been paired with the
monitor unit. The
channel on the monitor unit. This is necessary for configuring additional camera
units.
1. If you want to add a new camera, please choose which number of cameras
you want to add, and then select add camera icon
to confirm your selection (See Fig. 16).
The screen will show
please also press and hold the power button
camera side at the same time.
2. If you want to delete a paired camera, please choose which number of
cameras you want to delete, and then select delete camera icon
the camera (See Fig. 16).
3
.4 VOX Sensitivity ( VOX Sensitivity )
This submenu lets you choose the VOX (voice activation) sensitivity level.
When the level set to high, the screen will turn on by lower sounds. (See Fig.17).
4
on the monitor unit to display the main menu on
and brightness up
button to confirm a setting.
"Cam Setting" function gives each baby unit a separate


"Press the pairing button on the Baby unit" , and then


buttons to navigate
for auto-scan function.

and press the
around 3 seconds on the
button
to delete