Beko VCS 50700 CW Manuel D'utilisation page 7

3 Operation
3.1 Intended use
This appliance is intended for domestic use. It is
not suitable for industrial use.
3.2 Attaching/removing the
pipe
You can use the product as a hand-
held sweeper when the handle (1)
C
and the brush are not attached.
After attaching the handle and
brush (5), the product will become
suitable for vacuuming the floor.
1. Attach the handle (1) to the main body (6) (you
will hear a click).
2. To remove the handle (1), press the release
button (3) and pull the handle.
Stick Vacuum Cleaner / User Manual
Handle
release
button
3.3 Attaching/removing the
brush
You can attach/remove the brush to/from the
suction nozzle.
3.4 Accessories
Crevice tool
When used as a hand held
sweeper, the product is suitable
for the cleaning of the surfaces
which are difficult to clean, such as
the areas remaining under sofas
and furniture.
3.5 Operation
1. Plug in the appliance after pulling out the power
plug located at the back of the appliance.
2. Press the on/off button (2) to switch on your
appliance.
7 / EN