Safety Instructions - Rotary 100 Serie Manuel D'utilisation

SAFETY INSTRUCTIONS

• Never allow unauthorized or untrained persons to operate lift or rolling jacks.
• Shop Policy should prohibit customers or non-authorized persons from being in shop area while lift is in use.
• Thoroughly train all employees in the use and care of lift and rolling jacks.
• Be Sure no one is standing in front or behind lift while vehicle is being driven onto or backed off the lift.
• DO NOT allow rear tires or portion of vehicle to interfere with ramp/chocks.
• Be Sure front wheel stops are in raised position before driving vehicle onto lift.
• Never allow front wheels to strike the front wheel stops.
• DO NOT permit employees or customers on lift when it is either being raised or lowered.
• Always stand clear of lift when raising or lowering and observe "Pinch Points" Warning.
• Never overload lift: capacity of lift is 14,000 lbs. (7,000 lbs. per axle). CAPACITY SHOULD NOT BE EXCEEDED.
• Always engage parking brake and use the rear wheel chocks to keep the vehicle from rolling freely on the
runways.
• Always lower lift on locks before working on vehicle.
• Keep area around lift clean of tools, debris, grease, and oil.
• Always keep runway clean.
• Replace all caution, warning, or safety related decals on the lift when unable to read or missing.
• For Rolling Jack Safety Instructions see Rolling Jack Installation, Operation and Maintenance Instructions in
the rolling jack box.
• Never use work step while lift is in a raised position.
3