Chauvet Professional COLORADO 1-Quad Zoom Tour Guide De Référence Rapide page 3

COLORado™ 1-Quad Zoom Tour QRG
What Is
Included
AC Power
Power Linking
AC Plug
DMX Linking
DMX Connection
Master/Slave
Connection
·
COLORado™ 1-Quad Zoom Tour
·
Neutrik® powerCON® Power Cord
·
Gel Frame
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 12 COLORado™ 1-Quad Zoom Tour products at 120 V,
21 products at 208 V, or 23 products at 230 V. Never exceed this number. Power
linking cords can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
The COLORado™ 1-Quad Zoom Tour will work with a DMX controller using a
3- or 5-pin DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
The COLORado™ 1-Quad Zoom Tour uses a 3- or 5-pin DMX data connection for
its DMX personalities: TOUR, TR16, FULL, ARC.1, AR1.D, ARC.2, AR2.D,
C1Q, STD.Y, AR2.S, AR2.Z, and HSV. See the User Manual for information
about connecting and configuring the product for DMX operation.
·
The C1Q personality has been designed to be used to match the
Colorado™ 1-Quad series. In this personality, the zoom is locked to
match the beam and field angles of the Colorado™ 1-Quad series.
·
For optimum control of the 16-bit dimming channels in the TR16 and
STD.Y personalities, be sure that both dimming curves in SET > DIM and
SET > CURV are set to OFF.
The COLORado™ 1-Quad Zoom Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual for information about connect and
configure the product for master/slave operation.
·
·
·
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Gel Frame Holder
(7.5 in/191 mm accessories)
Warranty Card
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue
EN
Silver
Green