Télécharger Imprimer la page

Orbegozo KT 6011 Manuel D'instructions page 10

Publicité

Les langues disponibles

Les langues disponibles

KT 6011
necessary. When pulling the filter out, be careful it is hot
after boiling water.
• If operated on wood furniture, use a protective pad to
prevent damage to delicate finishes.
• Remove and replace the lid carefully when hot.
• Do not switch your kettle on if it is empty.
• To protect against fire, do not operate in the presence
of explosive and / or flammable fumes.
• A kettle should not be left connected to a wall socket
when the room temperature is likely to fall to outdoor
winter temperatures. At sub-zero temperatures, the
automatic control thermostat may reset to boiler
energize the element.
• Do not use the kettle for any purpose other than
heating water. Other liquids or food will contaminate the
interior.
• This product has not been designed for any other uses
than those specified in this booklet.
• Position the lid so that steam is directed away from
the handle.
• Do not remove the lid while the water is boiling.
¡SAVE THESE INSTRUCTIONS!
INSTRUCTIONS FOR USE
Before first use, fill the kettle with clean water to maximum capacity and boil. Discard the water and
repeat.
The kettle should always be unplugged when filling or adding water.
Fill the kettle with water to the desired level. Do not overfill or there will be a risk of spillage or spitting.
The water level indicator will assist you to measure correct amount. You can fill the kettle via the spout
or after the lid is removed. Do not forget to close the lid after filling; otherwise the kettle will not be
automatically switched off after boiling.
Do not fill water more than the "MAX" mark on water level indicator (1.7 liters of water).
An automatic safety cut-out has been fitted for protection against overheating. It will operate if the
kettle is switched on when containing insufficient water. If the automatic safety cut–out has operated,
10

Publicité

loading