Publicité
Les langues disponibles
Les langues disponibles
English
Deutsch
Français
Dansk
Nederlands
Svenska
2 VELUX
®
3-8
9-14
15-20
ENGLISH:
21-26
Read instructions carefully before installation. Please keep instructions
for future reference.
27-32
Safety
33-38
• Disconnect from mains supply before installation or removal of the
sensor and before carrying out any maintenance or service work and
ensure that it cannot be reconnected unintentionally during this time.
• If the sensor is activated, the chain actuator automatically closes the
modular skylight. For personal safety, never have your hand or body out
of the modular skylight without disconnecting from mains supply.
Installation
• The sensor must be installed in accordance with current national
legislation.
• The sensor must be positioned approx 2 m above the roof surface, be
exposed to the elements and if possible close to the modular skylight.
• The sensor must be connected to power supply unit 3UC A02 and
interface KLF 100, please refer to the instructions for these products.
NB: These products are for indoor installation only.
Product
• The sensor has been designed for use with genuine VELUX products.
Connection to other products may cause damage or malfunction.
• The sensor is a low voltage product.
• Do not paint or lacquer the sensor.
• Dirt on the sensor may cause operating problems. Therefore, it is
recommended to clean the sensor with a soft wet cloth once or twice a
year or when required.
• Electrical products must be disposed of in conformity with national
regulations for electronic waste and not with household waste.
• The packaging can be disposed of with usual household waste.
• If you have any technical questions, please contact your VELUX sales
company, see telephone list or www.velux.com.
Important information
2 m
KLF 100
3UC A02
VELUX
3
®
Publicité
