Publicité
Les langues disponibles
Les langues disponibles
–
If LED-display shows the error code, please reference to the solution as following.
Error Code
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
EE
Error Code List:
Cause and Solution
The current is over 20A
Voltage is under 95V
Voltage is over 145V
The accessory and spare parts are damaged, please contact the
nearest authorized service facility for trouble shooting, repair and
adjustment.
The accessory and spare parts are damaged, please contact the
nearest authorized service facility for trouble shooting, repair and
adjustment.
The accessory and spare parts are damaged, please contact the
nearest authorized service facility for trouble shooting, repair and
adjustment.
The cooking temperature is over 390
After the unit has been cooled down, the unit would be automatic
switches to standby mode.
Ventilation blocked, heat can not be blew out of the machine
smoothly, it causes device inside over-heat. Please keep a minimum
distance of 5 to 10 cm from the device to walls or other items. Please
power off to eliminate the wrong record and let the unit cool down,
and then re-plug the power cord and restart the unit.
The cooking temperature is over 300 .If use the function mode
"Power" to cook, the max temperature is 300 .If the cooking
temperature is over 300
the error. Please power off to eliminate the wrong record and let the
unit cool down, and then re-plug the power cord and restart the unit. If
you would like the cooking temperature is over 300 , please use the
function mode "TEMP", the max temperature is 390 .
Using cookware without magnetic bottom or the diameter of the
bottom is less than 12cm (5"). Please use cookware with magnetic
and flat bottom. Such as iron or cast iron cookware, or cookware with
18/0 stainless steel bottom. The bottom should have a diameter of 12
to 26cm (5" - 10"). After using suitable cookware, the unit will restart
automatically
The total cooking Timer reaches 150 mins. After reaching 150 mins,
the LED shows "EE" and sound, the device automatically goes into
standby mode. Please press ON/OFF button to restart the unit.
6
in the function mode "TEMP".
℉
℉
in this mode, the unit would be appeared
℉
℉
℉
℉
Publicité
