tiko Energy Solutions M-BoxNG4M Manuel De L'utilisateur page 6

M-Box NG4M User's Manual
LED Explanation
IMAGE 5 shows the 4 LEDs indicating the device and system status. It can be interpreted
according to the following table:
LED Purpose
① O System Status
PLC Connection
②
Mobile Signal
③
Backend Connec-
④
tion
* Data cannot be saved onto internal SD card. Usually, M-Box can repair it automatically.
If the LED does not turn green after some hours, call customer support, and ask for a
replacement. Your system will stay operative, but cannot provide stored data to the
back-end cloud-system that was not sent during periods of lost connection.
Step 1 Remove the device from the socket.
Step 2 If the device remains property of tiko Energy Solutions AG or
its authorized reseller, it must be returned. Otherwise, the
ultimate disposal of a device shall be handled according to
national laws and regulations.
tiko Energy Solutions AG
English
Green
Operational
All paired devices
reachable
3G
Connected
Uninstalling
Yellow
Storage problem*
Some paired de-
vices not reacha-
ble.
2G
Establishing con-
nection. Must
soon turn green.
IM-0004-0002 Rev. 4
6 / 40
Red
Power-on self-
test. If it stays red,
the device is de-
fective.
None of the
paired devices
reachable.
No connection
No connection