Kärcher IVM 50/24-2 Mode D'emploi page 8

2. Regularly check the pocket filter for
damage. Replace the pocket filter if
damaged.
Replacing the pocket filter
4
3
2
1
Screws
1
Clamping ring
2
Pocket filter
3
Cleaning fixture
4
8
Failure to observe the weight
Risk of injury and damage
Use suitable lifting gear for lifting the
suction head.
1. Remove the suction head, see sec-
tion Removing the suction head.
2. Remove the adapter ring.
3. Release the strap.
4. Remove the filter unit from the de-
vice using the handles and turn it
over.
5. Remove the screws and remove the
cleaning fixture.
6. Loosen the clamping ring screw
connection.
7. Remove the pocket filter.
8. Fit the new pocket filter.
On installation, take care to ensure
that the lug on the filter insert enga-
ges the shaft.
en_us