Di4 Aspirojet Duo Mode D'emploi page 16

HOW TO USE
ATTENTION:
Full charge before using.
Keep the rubber clean before cleaning. there is track on the window, if the some dust on the
rubber.
If the battery is not enough, it cut off by itself.
All the dust and water is not excel the max line on the tank.
USE AS A SCRAPER:
Remove the spray head, fill full the bottle by cleaning water, make sure the spray nozzle is on "spray"
or "stream". Spray the water on the window, clean the window by the cleaning mop .
Assemble the appliance with scraper. Switch on the window cleaner, push the scraper touch the win-
dow, clean the window from top to down, suction the dust water into the tank.
The scraper is only use for water and big plane surface .
USE AS A VACUUM:
Assemble with the little brush or soft crevice tool, suction the dust or water into the tank.
The soft crevice can be used for dust and water.
The little brush only used for dust.
EMPTY THE TANK:
ATTENTION: HOLD THE TANK BEFORE RELEASE THE TANK FROM THE UNIT. If push the release
button directly, the tank will drop down.
Remove the accessory from the connector. Hold the tank, Push down the tank release button. Turing
the tank a little and take it out.
Take out the filter unit, empty the tank. Remove the filter and connector to clean.
Clean the tank and filter.
ATTENTION: KEEP THE FILTER DRY BEFORE ASSEMBLY THE FILTER UNIT
16