Polar GE632 Mode D'emploi page 5

Connection
Connecting the beer tower
1. Pull out the air conduct hose from the hole in
the cabinet surface.
2. Unscrew the 2 bolts to release the cover plate
which is located on the cabinet's inner surface.
Bolt
Cover plate
3. Thread the big black washer through the beer
line that is coming from the beer tower.
Beer line
Beer tower
GE632-GE633_ML_A5_v1_20210423.indb 5 GE632-GE633_ML_A5_v1_20210423.indb 5
4. Insert the beer line into the cabinet via the
hole. Then insert the air conduct hose into the
beer tower.
Air conduct hose
Beer tower
5. Align all holes and install the 4 screws to fix
the beer tower in place.
6. Slide the beer tower's shade downward fully.
7. Re-attach and fix the cover plate to the
cabinet's inner surface with bolts.
Cover plate
Black
Washer
Beer line
Beer line
Bolt
UK
5
2021/4/23 13:26 2021/4/23 13:26