Delete A Step; Delete A Chase; Delete All Chases - Ghost Mydmx Manuel

2.3.3

Delete a Step

Step/time
Music trigger
Blackout
Step
PROG
8888
Auto trigger
Chase Scene Bank
Tap Sync/Display
BANK
Auto/Del
2.3.4

Delete a Chase

Chase Button 1-6
Auto/Del Chase
2.3.4 Delete all Chase
Auto/Del
BANK
1. Program enable.
2. Select the chase that contains the step you wish to delete.
3. Tap the Tap Sync/Display button causing the Segment
Display shows the steps.
4. Tap the Bank Up/Down button to scroll to the step you wish
to delete.
5. Tap the Auto/Del button to delete the step, all LEDs and
the Segment Display will flash three times briefly indicating
that the step has been deleted
1. Select the chase you wish to delete.
2. Press and hold down the Auto/Del button. Tap the Chase
button while holding down the Auto/Del button, all LEDs
and the Segment Display will flash three times briefly
indicating this chase has been deleted.
1. With the power off, press and hold down the
Auto/Del and Bank Down buttons at the same time.
2. Apply the power again, chase memory should be cleared

(delete all chases).

Page 41