Output Setting (Output Power Level/Slope); Configuration Maintain - cahors CAP 532 Notice D'utilisation

Output Setting (Output Power Level/Slope):

1. Output power level can be adjusted from 93 dBμV to 113 dBμV
2. Slope rate can be changed from 0 to -9 dB
The more channels are added to CAP 532, the lesser output power you should give to each
channel.

Configuration Maintain:

a. Software Update:
To update the software, press "OK" on Software update, then click "Yes" to start the update.
NOTE: In case SW upgrade is needed, the software
package must be placed in the "Download" folder of
your mobile device as shown below:
20