cahors CAP 532 Notice D'utilisation page 41

NOTE:
st
A specific "RF-IN" will lock to either VHF or UHF band when adding a channel for the 1 time.
In below example, RF-IN1 is locked to UHF band, and will not accept VHF band channels when
adding more channels using RF-IN1 signal as input source. If the user wishes to receive VHF
band channel, he/she can either remove any channel associated with RF-IN1 or use another
input port to receive the signal.
To avoid signal overlapping, Output Channel cannot be duplicated. In below example, the user
cannot complete the setting of the channel due to Output Channel 7 has been used already.
18