Publicité
STEP 7 - ATTACHING GLASS DRAWER FRONT
5. Extend the middle drawer.
6. Thread the screw and washer through the holes inside the drawer to the glass front.
7. Install the screw caps as shown in figure 7.
8. Tilt the top tipout drawer down.
9. Thread the screw and washer through the holes inside the drawer to the glass front.
10. Install the screw caps as shown in figure 10.
5
8
© 2017 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
6
9
12
7
10
Part no. 209-1276-rA rev. 06/16/17
Curated Cartesian H2 - 3 Drawer
Publicité
Chapitres
