Eureka 3670 Serie Guide Du Propriétaire page 8

To Replace HEPA Filter
Fig. 13
Fig. 14
Fig. 15
8
Eureka Customer Service HELPLINE 1-800-282-2886
(on some models)
Step 1: Grasp the bottom clips
(Fig. 13).
Step 2: Pull out and down to release (Fig. 13).
To Re-install HEPA Filter
(on some models)
Check the HEPA filter
change. Replace twice a year or after every six bag
changes as needed.
Step 1: Insert upper filter corner tabs
rear housing tabs
Step 2: Pivot filter
I
filter click securely into place on the cleaner
(Fig. 14).
To Clean the Motor Filter
CAUTION: Turn off vacuum and unplug the
electrical cord before cleaning
the motor filter. Never operate the
vacuum cleaner without the motor
filter in place.
Step 1: Remove the dust bag. See page 7 for details.
Step 2: Grasp filter
Step 3: Rinse under warm water.
Step 4: When all parts are completely dry, replace
filter and disposable dust bag (see page 7
for more details).
on the filter
O
with each disposable dust bag
I
firmly under
P
(Fig. 14).
Q
down until bottom clips
and pull out to remove (Fig. 15).
R
I
on
O