Table des Matières
Publicité
ENGLISH
Before using
Installation
When placing the speakers on a stand, etc.
Stick the included anti-slip pads (cork, approximately 1 mm thick) on
the four corners of the bottom surface.
n SC-F1312
n SC-C1312
Anti-slip pads
2
When mounting the speakers on a bracket
• You can use the M5 nuts inserted in the back of the speakers.
• The speakers can be mounted on a wall using the keyhole hooks
on its rear panel.
• When you mount the speakers, follow the instructions in the manual
included with the ceiling mount bracket, and be sure to install them
properly and securely.
Anti-slip pads
n SC-F1312
Keyhole hook
Speaker bracket
mount screw hole
n SC-C1312
Speaker bracket mount screw hole
Keyhole hook
0.49 ft / 150 mm
Moving the speakers
• Do not subject the speakers to shock.
• Turn off the power and unplug the power cord from the power
outlet (DSW-1312). Next, disconnect all connection cables to other
systems before moving the speakers.
• When moving the subwoofer (DSW-1312), do not hold the base of
the woofer section. Subjecting the surface of the woofer section to
strong force may damage the woofer.
When holding the subwoofer, hold it with the space around the foot
as shown in the illustration below.
Woofer section
Foot
Cleaning
• Use a dry wiping cloth and wipe lightly to remove dirt from the
cabinet and operation panel.
• When using chemically treated cloths, follow the precautions
provided for them.
• Do not use benzene, thinners, or other organic solvents or
insecticides on the speakers since they may cause a change in
quality or color.
Other cautions
• Raising the amplifi er's volume excessively and playing with distorted
sound could damage the amplifi er and speakers. Enjoy the sound at
a reasonable volume level.
• When moving the speakers, note that applying strong force to the
surface of the speaker through the speaker net could damage the
speaker.
Publicité
Table des Matières
