Electrical Connection; Before You Start Using Your Dryer; Product Data - Indesit IS41V Notice D'utilisation Et Installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Installation
Electrical connections
Make sure of the following before you
insert the plug into the the electrical socket:
Make sure your hands are dry.
The socket must have an earth connection.
The socket must be able to sustain the
machines maximum power, which is
indicated on the rating label (see Dryer
Description).
Power voltage must be within the values
indicated on the rating label (see Dryer
Description).
The socket must be compatible with the
dryers plug. Should this not be the case,
replace the plug or the socket.
! The dryer must not be installed outdoors,
even if the space is sheltered. It can be
very dangerous if it is exposed to rain or
storms.
! Once installed, the dryers electrical wire
and plug must be within easy reach.
! Do not use extension cords.
! The power cord must not be bent or
squashed.

Product Data...

Brand
Indesit
Rated capacity of Cotton laundry for the standard programme at full load 4 kg
The weighted Annual Energy Consumption (AE
Consumption per year, based on 160 drying cycles of the standard cotton programme at full and partial load, and the
consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.
This household tumble dryer is an Non-Automatic Air-Vented Dryer
Energy consumption : full load E
Power consumption : off-mode (P
Duration of the 'left-on mode' for power management systems - minutes
The 'standard cotton programme' suitable for drying normal wet cotton laundry that is the most efficient programme in
terms of energy consumption for cotton used at full and partial load is High Heat
Programme time (minutes) : weighted (T
Airborne acoustical noise emissions 66 dB(A) re 1 pW
* "consumer information in compliance with EU Regulation 932/2012".
Typical energy used
-
Typical drying time
-
Save energy and respect the environment
Wring out items to eliminate excess water before tumble drying (if you use a washing machine first, select a high
spin cycle). Doing this will save time and energy during drying.
Always dry full loads - you save energy: single items or small loads take longer to dry.
Clean the filter after each use to contain energy consumption costs (see Maintenance).
(EU Regulation 392/2012)
) 329.6 kWh
c
2.85 kWh, partial load E
dry
) 0.00 W, left-on mode (P
o
) full & partial load 71, full load (T
t
Synthetics
full load 0.82 kWh,
Synthetics
full load 30 minutes,
! The power cord should be regularly
checked. If the supply cord is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard. New or
longer power cords are supplied at an extra
charge by authorised dealers.
! The manufacturer denies any responsibility
should any of these rules not be followed.
! If in doubt about any of the above consult a
qualified electrician.

Before you start using your dryer

Once you have installed your dryer and before you
use it, clean the inside of the drum to remove any dust
that could have accumulated during transport.
Maximum load
Natural fibres : 4 kg
Models
Energy efficiency class C
1.46 kWh
dry1/2
) 0.00 W
l
) 94, partial load (T
dry
partial load not applicable
partial load not applicable
IS41V
) 53
dry1/2
3
GB

Publicité

Table des Matières
loading

Table des Matières