Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
42
5. Press once the / BAND button (5) to the
playback while retaining the program.
6. To delete the program, press the / BAND
button (5) twice.
NOTE:
• Do not use irregular shaped CDs (example:
heart-shaped, octagonal ones). It may result
in malfunctions.
• Do not place more than one disc in the disc
compartment.
• Do not try to open the disc compartment dur-
ing playback.
• Do not touch the lens. Doing so may cause
malfunctions.
• If a disc is incorrectly inserted - or no disc
has been inserted - the symbol "Cd" and the
word "no" appear in the display.
• Playback of CDs produced by the user can-
not be guaranteed due to the large variety of
software and CD media available.
Playing back Music in MP3 Format
With this device it is possible to play back pieces
of music in MP3 format. The device also supports
all standard CD types: CD, CD-RW, CD-R.
This device is able to play MP3 CDs. Up to 999
tracks can be compressed and stored on these
CDs. Your machine detects an MP3 CD auto-
matically (the total number of tracks and MP3s
appears in the display). If you would like to play
one of these CDs, proceed as described under
„CD operation". Tracks can be programmed as
described under „Programmed Play".
Please note:
There are a number of different recording and
compression methods, as well as quality differ-
ences between CDs and self-recorded CDs.
Furthermore, the music industry does not adhere
to fixed standards (copy protection).
For these reasons it is possible that in rare cases
there are problems with the playback of CDs and
MP3 CDs. This is not a malfunction of the device.
Radio Operation
• Press the POWER ON/OFF button (16) to
switch the device on.
• Press the / BAND button (5) repeatedly till
FM or AM is shown on the display.
FM (MHz) = Very High Frequency,
AM (KHz) = Medium Wave
All manuals and user guides at all-guides.com
• Tune the program by turning the TUNING
• The stereo control lamp (in the display) is
Alarm Function
Setting the Timer
1. Make sure the unit is power off.
2. Press the ALARM ON/OFF button (18) to turn
3. Press the MODE/ALARM button, then repeat-
4. Press the MODE/ALARM button again, then
5. Press the MODE/ALARM button once more,
To Check the Alarm Time
Press the MODE/ALARM button, the preset alarm
time will be displayed.
Buzzer Alarm
1. Make sure the BU ALARM was selected.
2. When the preset ALARM time comes,
Radio Alarm
1. Make sure the tU ALARM was selected.
2. When the preset ALARM time comes, the unit
CD Alarm
1. Make sure the CD ALARM was selected.
2. When the preset ALARM time comes, the unit
USB Alarm
1. Make sure the USB ALARM was selected.
2. When the preset ALARM time comes, the unit
wheel (8). The display will show the radio
frequency and, to the left, the radio band.
illuminated only when the selected program is
received in stereo quality. If the signal is too
poor and noise in the received program, it will
flicker. Try to improve reception by turning and
unrolling or rolling the antenna up.
the ALARM on and the ALARM will appear in
the display.
edly press the
DIR- (6) or
ton to set the desired hour time.
repeatedly press the
DIR- (6) or
button to set the desired minute time.
then repeatedly press the
DIR+ (7) button to cycle through the follow
options: tU/CD/USB/BU, and select the de-
sired mode.
BUZZER will appear in the display and the
buzzer sound will be audible. To stop the
buzzer sound, press ALARM ON/OFF button
to OFF.
will enter RADIO mode and play automati-
cally.
will enter CD mode and play automatically.
will enter USB mode and play automatically.
DIR+ (7) but-
DIR+ (7)
DIR- (6) or
Publicité
