AEG SRC 4331 CD/MP3 Mode D'emploi page 40

ENGLISH
40
Special safety information
This device works with a
class 1 laser.
Location of Controls
1 PHONES
2 VOLUME control
3 DISPLAY button
4 PLAY/PAUSE button (►/II)
5 STOP/ BAND button ( / BAND)
6 DIR- button (search bwd)
7 DIR+ button (search fWd)
8 TUNING control
9 USB socket
10 SNOOZE/LIGHT button
All manuals and user guides at all-guides.com
11 CD door
12 DISPLAY
13 FUNCTION (CD/USB/RADIO) switch
14 MODE/ALARM button
15 SLEEP button
16 POWER ON/OFF button
17 PROG./CLOCK SET button
18 ALARM ON/OFF (CD/USB/BUZZER/RADIO)
19 BACK UP Battery compartment
First Use of the Device/
Introduction
• Before the first use of the device, read the user
• Select a proper place for the device such as
• Make sure the device is vented sufficiently.
• If still in place, remove the protection foil from
Power supply
• Insert the mains plug into a properly installed
• Make sure the grid voltage corresponds to the
Inserting the batteries
(Batteries are not included with the device)
In case of a power cut or if the device is un-
plugged, with batteries inserted, the settings will
be kept.
1. Open the battery case on the bottom of the
2. Insert 2 R03 "AAA" batteries 1.5V. Mind the
3. Close the battery case.
4. If the device is not used for an extended
• Never use different battery types or new and
• Batteries must not be disposed of in the
switch
manual carefully.
a dry, and even non slip area where you can
easily operate the device.
the display.
socket with 230V, 50Hz.
figures on the rating plate.
device.
correct polarity (indicated on the bottom of
the battery case).
period of time, remove the batteries from the
device to avoid any leaking of battery acid.
CAUTION:
used batteries together.
garbage. Please bring used batteries to
competent collection centers or back to the
dealer.