Scene Steps; Add Step; Delete Step; Timing - Chauvet Professional NET-XII Mode D'emploi

Scene Steps

This feature displays the amount of steps saved to the scene. To view previously saved steps, follow the
instructions below.
1. Select the Scene to configure as instructed in
2. Use the knob to select 2.Step:(0/0).
3. Press the knob.
4. Turn the knob to cycle through the saved steps.

Add Step

This function adds a step to the scene. To add a step to the scene, do the following:
1. Select the Scene to configure as instructed in
2. Use the knob to select Add Step.
3. Press the knob.

Delete Step

This function deletes a step from the scene. To delete a step from the scene, follow the instructions below.
1. Select the Scene to configure as instructed in
2. Use the knob to select Delete Step.
3. Press the knob.

Timing

This function sets the intervals between steps, as well as a fading effect if desired.
1. Select the Scene to configure as instructed in
2. Use the knob to select 5.Timing.
3. Press the knob.
4. Use the knob to select 1.Save Step (saves timing for the selected step), 2.Fade In Time:0.10S—
9M59S (selects fade in time), 3.Fade Out Time:0.10S—9M59S (selects fade out time), 4.Delay
Time:0.10—9M59S (selects delay time), or 5.Exit (to cancel).
5. Press the knob.

Trigger Settings

The Net-X II can assign a trigger to an external switch to trigger a saved scene.
1. Use the knob to select 10.Trigger Settings.
2. Press the knob.
3. Use the knob to select Trigger 1-4.
4. Press the knob.
5. Use the knob to select the desired Scene 1-10.
6. Press the knob.

Backup

The Net-X II has a backup setting that allows the product to save and load configurations.
1. Use the knob to select 11.Backup.
2. Press the knob.
3. Use the knob to select 1.Save.
4. Press the knob.
5. Use the knob to select 2.Load.
6. Press the knob.

Firmware Version

This function displays the firmware version of the product.
1. Use the knob to select 12.Firmware Version.
2. Press the knob. The firmware version will display: B1.0 V0.7.
3. Press the knob to exit.

Exit

This function exits out of the menu to the main screen.
1. Use the knob to select 13.Exit.
2. Press the knob. The product returns to the home screen.
15
Record Scenes.
Record Scenes.
Record Scenes.
Record Scenes.
Net-X II User Manual Rev. 2
Operation