Features; Programming Track Numbers; Clearing The Programme - Philips EXP 301 Mode D'emploi

Features

Programming track numbers

You can select up to 50 tracks and store them in the memory in a desired
sequence.You can store any track more than once.
Select a track with ∞ or §.
1
2
Press PROGRAM to store the track.
is shown and P with the number
PROGRAM
of stored tracks is displayed.
3
Select and store all desired tracks in this way.
If necessary press 9 to stop normal playback.
4
Press 2; to start playback of the programme.
Playback of the programme starts.
To add additional tracks to your programme,
0 0
press 9 to stop playing the programme and
continue with step 1.
You can review the programme by pressing
0 0
PROGRAM for more than 3 seconds.
All stored tracks are displayed in sequence.

Clearing the programme

If necessary press 9 to stop playback.
1
Press 9 to clear the programme.
2
CLr is displayed,
and the programme is cleared.
Notes:
The programme will also be cleared if you
open the CD lid or interrupt the power supply.
After storing 50 tracks, FULL is displayed.
20
disappears
PROGRAM
PROGRAM
TITLE
PROGRAM